Interface breakout boards
Sparkfun Load Cell Amplifier breakout board is precise and accurate ,reads data from load cells to measure weight.
The smallest and easiest to use serial conversion circuit on the market! This board has one purpose in life - to convert RS232 to TTL and vice versa (TX and RX).
RS232 Shifter SMD is a coverter for RS232 to TTL (to and fro).
The SparkFun Micro OLED Breakout Board is a visual display unit that is big enough to fit the chosen graphics.
This is the newest revision of the USB to serial converter with a SMD 6-pin header on the bottom, which makes it smaller and more compact.
This is the newest revision of our FTDI Basic. We now use a SMD 6-pin header on the bottom, which makes it smaller and more compact. Functionality has remained the same.
LP55231 LED Breakout is an Led controller that controls a series of RGB'S and is best suited for variable intensity and colour mixing applications.
Are you low on I/O? No problem! The SX1509 can leverage your I2C interface for 16 extra channels of GPIO.
This is a breakout board for the built in WS2812 RGB LED.
The SparkFun bi-directional logic level converter is a small device that safely steps down 5V signals to 3.3V AND steps up 3.3V to 5V at the same time.
This is a breakout board for the PCA9306 dual bidirectional voltage-level translator.
This is a breakout board for the Texas Instruments TXB0104 module. The TXB0104 is a 4-bit bidirectional voltage-level translator with automatic direction sensing.