RPLIDAR A2 is the latest addition to the LIDAR family that rotates 360 degrees with a range of 6m and scan at the rate of 10Hz.
Sparkfun Servo trigger is a small board that can control movements of servo motors.
Sparkfun Line Follower Array is programmed to follow a said path either black or white using the inbuilt IR sensors.
The Accelerometer sensor is an add-on for your RedBot that provides bump and motion detection. The sensor works by measuring acceleration forces on the x, y, and z axis.
The Line Follower sensor is an add-on for your RedBot that gives your robot the ability to detect lines or nearby objects.
This outdoor sensor provides very short to long distance detection and ranging in a compact, robust PVC housing. The ultrasonic sensor meets the IP67 water intrusion standard and matches standard electrical 3/4‑inch PVC pipe fittings.
LinkSprite JPEG Color Camera TTL Interface - Infrared captures high resolution pictures even in the dark with IR LED'S.
This sensor uses an infrared emitted diode combined with an infrared phototransistor to detect the reflected infrared signal.
The EasyDriver is a simple to use stepper motor driver, compatible with anything that can output a digital 0 to 5V pulse (or 0 to 3.3V pulse if you solder SJ2 closed on the EasyDriver).
Solenoids are a great way to induce linear motion for pushing, pulling or controlling switches and levers.
These connectors are made from high-temp nylon with gold-plated spring pins or sockets molded in.
The Lockitron is an innovative home security device from Apigy that allows you to lock and unlock the deadbolt on your front door from your smart phone.