compatible with all modules included in the Grove system.
This 150mm ribbon cable has an AMP Micro-MaTch connector on either end. It's a quick and easy way to get your HUB-ee wheels connected. Snag a few if you're building a HUB-ee robot!
This is a SparkFun exclusive! These are 155mm long jumpers terminated as male to female.
This is a 1.75" long JST SH communication cable which can be cut and hacked to your needs and can even be used as pigtails.
The FTDI cable is a USB to Serial (TTL level) converter which allows for a simple way to connect TTL interface devices to USB. The I/O pins of this FTDI cable are configured to operate at 5V.
Stereo audio jacks are best used as headphone jacks and with stereo systems.
Integrating Ethernet support into your project is a great way to relay data through a local area network and even bounce information out to the internet. Sometimes it's hard to get power to your Ethernet devices.
This is an interface cable for the Bus Pirate, designed to connect to its 2x5 I/O header.
TRRS connectors are connectors that have three conductors unlike others ,used in phones etc.
This is a 2-pin JST RCY connector typically used for low-voltage applications running 10A or less.
Cable color and shape may vary slightly from image as our stock rotates. USB 2.0 type A to micro USB 5-pin. This is a new, smaller connector for USB devices. Micro USB connectors are about half the height of mini USB. Micro USB is found on newer hand held devices like cell phones and portable media devices.