Base Shield V2

Base Shield V2

The Grove base shield is a complete unit to help you connect all the Grove components directly to your Arduino. 

$10.97
Tax included Ships in 1-2 days.
 Last items in stock
 Customer ratings and reviews
Nobody has posted a review yet
in this language
  • Products in stock -  Same day shipping within business hours
Products on backorder - Usually ships in 10-15 working days depending on manufacturer Products in stock - Same day shipping within business hours Products on backorder - Usually ships in 10-15 working days depending on manufacturer
  • Return policy - Any product that is defective or damaged upon arrival can be replaced within 10 days Return policy - Any product that is defective or damaged upon arrival can be replaced within 10 days
PayPal

Arduino Uno is the most popular Arduino board so far, however it is sometimes frustrating when your project requires a lot of sensors or Leds and your jumper wires are in a mess. The purpose of creating the Grove – Base Shield is to help you getting rid of bread board and jump wires. With the rich grove connectors on the base board, you can add all the grove modules to the Arduino Uno very conveniently!

Features

There are intotal 16 grove connectors on the Base Shield, here we use a table to show the details.

Specification
Name
Qty
Analog
A0/A1/A2/A3
4
Digital
D2/D3D4/D5/D6/D7/D8
7
UART UART
1
I2C
I2C
4

Apart from the rich grove connectors, on the board you can also see an RST button, a green LED to indicating power status, ICSP pin, a toggle switch and four row of pinouts. There is no need to explain the RST button and LED, but you really need to know below two features that is very important for your usage.

1.Power Compatible:

Every Grove connector has four wires, one of which is the VCC. However, not every micro-controller main board needs a supply voltage of 5V, some need 3.3V. That's why we add a power toggle switch to Base Shield v2 so that you can select the suitable voltage of the micro-controller main board you are using via this switch.

For example, if you are using Arduino UNO with Base Shield v2, please turn the switch to 5v position; while using Seeeduino Arch with Base Shield v2, please turn the switch to 3.3v.

2.Board Compatible:

The pinout of Base Shield V2 is the same as Arduino Uno R3, however Arduino Uno is not the board one that the Base Shield V2 is compatible with, here we listed the boards that we have confirmed that can be used with Base Shield V2.

  • Arduino Uno

  • Seeeduino V4.2

  • Arduino Mega / Seeeduino Mega

  • Seeduino LoraWan

  • Arduino Leonardo / Seeeduino Lite

  • Arduino 101

  • Arduino Due

  • Intel Edison

  • Linkit One

Note

  • If using Base Shield v2 with Seeeduino V3, please solder the pads, P1 and P2.

OPzl1QYRSz4TxporQi0OtuA0.jpg

Technical Details

Dimensions 69mm x 53mm x 23mm
Weight G.W 25g    
Battery Exclude

Part List

Base Shield V2 X 1
SS-103030000/08
1 Item
 Reviews

Be the first to write your review !