Breakout Boards

Teensy 3.0

SF-DEV-11780

Sparkfun Electronics

$29.24 tax incl.

Out of Stock. Ships in 10-12 business days

The Teensy is a breadboard-friendly development board with loads of features in a, well, teensy package. The Teensy 3.0 brings a 32 bit ARM Cortex microprocessor into the mix so you can do some serious number crunching.

More details

Add to wishlist

Shipping Rates

The Teensy is a breadboard-friendly development board with loads of features in a, well, teensy package. The Teensy 3.0 brings a 32 bit ARM Cortex microprocessor into the mix so you can do some serious number crunching.

The Teensy 3.0 comes pre-flashed with a bootloader so you can program it using the on-board USB connection: No external programmer needed! You can program for the Teensy in your favorite program editor using C or you can install the Teensyduino add-on for the Arduino IDE and write Arduino sketches for Teensy!

The processor on the Teensy also has access to the USB and can emulate any kind of USB device you need it to be, making it great for USB-MIDI and other HID projects. The 32 bit processor brings a few other features to the table as well, such as multiple channels of Direct Memory Access, several high-resolution ADCs and even an I2S digital audio interface! There are also 4 separate interval timers plus a delay timer! Oh yeah, and all pins have interrupt capability. Also, it can provide system voltage of 3.3V to other devices at up to 100mA.

All of this functionality is jammed into a 1.4 x 0.7 inch board with all headers on a 0.1" grid so you can slap in on a breadboard and get to work! Do keep in mind that the Teensy 3.0 is a 3.3V system, which makes it compatible with a lot of sensors that utilize 3.3V signalling but can run you into trouble if you're used to 5V dev boards.

Dimensions: 1.4 x 0.7" (~35 x 18 mm)

Features:

  • 32 bit ARM Cortex-M4 48 MHz CPU (M4 = DSP extensions)
  • 128K Flash Memory, 16K RAM, 2K EEPROM
  • 14 High Resolution Analog Inputs (13 bits usable, 16 bit hardware)
  • 34 Digital I/O Pins (10 shared with analog)
  • 10 PWM outputs
  • 7 Timers for intervals/delays, separate from PWM
  • USB with dedicated DMA memory transfers
  • 3 UARTs (serial ports)
  • SPI, I2C, I2S, IR modulator
  • I2S (for high quality audio interface)
  • Real Time Clock (with user-added 32.768 crystal and battery)
  • 4 general purpose DMA channels (separate from USB)
  • Touch Sensor Inputs

 

Documents:

Write a review

Teensy 3.0

Teensy 3.0

The Teensy is a breadboard-friendly development board with loads of features in a, well, teensy package. The Teensy 3.0 brings a 32 bit ARM Cortex microprocessor into the mix so you can do some serious number crunching.